The Public Safety Store View Cart The Public Safety Store Facebook The Public Safety Store Twitter The Public Safety Store Email
Shop By Category
ecommerce provided by Yahoo! Small Business
Testimonials:

Our Promise
We are a firefighter ran family owned business. No one else can understand what you do and the sacrifices you make like someone who has experienced the same. We will promise you the quickest shipping, fair prices, and courteous customer service. If we make a mistake, we fix it. It's that simple.

NFPA Fire Gloves - Firefighter Gloves - Firefighting Gloves

Fire Gloves are gloves that are approved by the NFPA (National Fire Protection Association) for use in structural firefighting operations. Firefighting gloves protect your hands from injury while you fight fire.

Most of our gloves are manufactured and assembled right here in the US. We value the satisfaction of our partners and customers and strive for increased value in the service and products that we provide for them.

Fire Armor Leather & Kevlar Fire Glove
Fire Armor Leather & Kevlar Fire Glove
Fire Armor Leather & Kevlar Fire Glove
Regular price: $94.99
Today Only: $90.99
You Save: $4.00
Size:  Quantity:
You have tried the other fire gloves - now try the best fire glove. The Fire Armor firefighter glove from Glove Crafters is a NFPA firefighting glove that has all of the features a premium firefighter glove should have. This NFPA approved firefighting glove is a true three dimensional form fitting glove that has curved finger design, inset thumb with enhanced finger dexterity. This means that while you are able to grab a large heavy hose, you can also grab your spanner wrench and operate with precision. We love this glove. It's comfortable. The one piece back shell is made from 100% Kevlar knit fleece 7.5 ounce FR and water repellent fabric. Most NFPA firefighting gloves that have that level of protection causes your hand to be stiff and rigid. The Fire Armor glove provides exceptional flexibility across the back of your hand. The non-restricting Eversoft knuckle band sewn across the back assures that your knuckles are protected from the harshest of conditions. This firefighter glove also includes an elastic band sewn into the back of the wrist crease for a close, but non-restrictive fitting cuff. If you injured your hands; you are essentially 100% disabled. You can't fight fire without full operation of your hands and fingers. That's why this firefighter glove has 5 separate finger forchettes that are curved and form fitted with black flexor cowhide that is tanned to meet NFPA 1971 flame resistance test for the highest finger dexterity and protection. A double backed breathable moisture barrier is 100% water proof, and viral/chemical penetration resistant. This barrier extends the full length of the glove. What does all that mean - simply put you get the absolute highest level of hand protection WITHOUT sacrificing dexterity and flexibility. Don't you HATE when you put your hand in a fire glove and when you pull it out the liner comes with you? The Fire Armor glove includes a special breathable adhesive that is coated over the fingers and thumb that ensures full liner / barrier / glove adhesion NFPA 1971 requirements for liner retention. What about when you wash your glove and your fire gloves get stiff? Not with the Fire Armor firefighter glove. The palm of the fire glove is a 1 piece 3.5 to 4.0 oz Eversoft cow leather that stays soft when wet and absorbs no water with repeated soakings. The thumb is a 2 piece inset the palm and again provides unrestricted movements of the thumb right to left. This fire glove is sewn completely with 30/3 Kevlar thread and is certified to NFPA-1971-2007 by the Safety Equipment Institute (SEI).

Technical Features

  • 60+ TPP and class leading Conductive Heat transfer protection.
  • 100% Kevlar knit fleece FR water repellent with 1 Pc. back shell.
  • A layered non-restrictive knuckle patch.
  • Extra layer of 6 oz. modacrylic liner sewn to the back shell.
  • A double backed 3 mil breathable Pyrotect Barricade moisture barrier.
  • 100% water proof, viral/chemical penetration and blood borne pathogen protection.
  • A layered 6 oz. 65% Kevlar/35% Nomex stitch bond FR liner.
  • Five separate curved form fitting forchettes from 3.5 oz. to 4.0 oz. grain cow leather for maximum finger dexterity with a 60+ PPT rating.
  • Exclusive breathable adhesive for ensuring full liner/barrier glove bonding.
  • 1 piece palm 3.50 oz. to 4.0 oz. Eversoft® cow leather tanned with additives to stay soft when wet and low water absorbance with repeated soakings with a 60+ TPP rating.
  • 4” Black nomex cuff with leather pull patch and hang up loop.
  • This glove is proudly made in the USA with highly skilled employees.
  • This glove is certified to NFPA 1971-2007 by the Safety Equipment Institute (SEI).
  • Reflective safety strip on wrist
  • Convenient leather loop
  • Snug fit wrist
  • 100% snag resistant kevlar
  • Extra knuckle padding
  • True 3-D curved finger forchettes
  • Rolllover Fingertips
Product Detail Page
Regular price: $94.99
Today Only: $90.99
Fire Armor Leather & Kevlar Fire Glove - Natural Color
Fire Armor Leather & Kevlar Fire Glove - Natural Color
Fire Armor Leather & Kevlar Fire Glove - Natural Color
Regular price: $94.99
Today Only: $90.99
You Save: $4.00
Size:  Quantity:
You have tried the other fire gloves - now try the best fire glove. The Fire Armor firefighter glove from Glove Crafters is a NFPA firefighting glove that has all of the features a premium firefighter glove should have. This NFPA approved firefighting glove is a true three dimensional form fitting glove that has curved finger design, inset thumb with enhanced finger dexterity. This means that while you are able to grab a large heavy hose, you can also grab your spanner wrench and operate with precision. We love this glove. It's comfortable. The one piece back shell is made from 100% Kevlar knit fleece 7.5 ounce FR and water repellent fabric. Most NFPA firefighting gloves that have that level of protection causes your hand to be stiff and rigid. The Fire Armor glove provides exceptional flexibility across the back of your hand. The non-restricting Eversoft knuckle band sewn across the back assures that your knuckles are protected from the harshest of conditions. This firefighter glove also includes an elastic band sewn into the back of the wrist crease for a close, but non-restrictive fitting cuff. If you injured your hands; you are essentially 100% disabled. You can't fight fire without full operation of your hands and fingers. That's why this firefighter glove has 5 separate finger forchettes that are curved and form fitted with black flexor cowhide that is tanned to meet NFPA 1971 flame resistance test for the highest finger dexterity and protection. A double backed breathable moisture barrier is 100% water proof, and viral/chemical penetration resistant. This barrier extends the full length of the glove. What does all that mean - simply put you get the absolute highest level of hand protection WITHOUT sacrificing dexterity and flexibility. Don't you HATE when you put your hand in a fire glove and when you pull it out the liner comes with you? The Fire Armor glove includes a special breathable adhesive that is coated over the fingers and thumb that ensures full liner / barrier / glove adhesion NFPA 1971 requirements for liner retention. What about when you wash your glove and your fire gloves get stiff? Not with the Fire Armor firefighter glove. The palm of the fire glove is a 1 piece 3.5 to 4.0 oz Eversoft cow leather that stays soft when wet and absorbs no water with repeated soakings. The thumb is a 2 piece inset the palm and again provides unrestricted movements of the thumb right to left. This fire glove is sewn completely with 30/3 Kevlar thread and is certified to NFPA-1971-2007 by the Safety Equipment Institute (SEI).

Technical Features

  • 60+ TPP and class leading Conductive Heat transfer protection.
  • 100% Kevlar knit fleece FR water repellent with 1 Pc. back shell.
  • A layered non-restrictive knuckle patch.
  • Extra layer of 6 oz. modacrylic liner sewn to the back shell.
  • A double backed 3 mil breathable Pyrotect Barricade moisture barrier.
  • 100% water proof, viral/chemical penetration and blood borne pathogen protection.
  • A layered 6 oz. 65% Kevlar/35% Nomex stitch bond FR liner.
  • Five separate curved form fitting forchettes from 3.5 oz. to 4.0 oz. grain cow leather for maximum finger dexterity with a 60+ PPT rating.
  • Exclusive breathable adhesive for ensuring full liner/barrier glove bonding.
  • 1 piece palm 3.50 oz. to 4.0 oz. Eversoft® cow leather tanned with additives to stay soft when wet and low water absorbance with repeated soakings with a 60+ TPP rating.
  • 4” Black nomex cuff with leather pull patch and hang up loop.
  • This glove is proudly made in the USA with highly skilled employees.
  • This glove is certified to NFPA 1971-2007 by the Safety Equipment Institute (SEI).
  • Reflective safety strip on wrist
  • Convenient leather loop
  • Snug fit wrist
  • 100% snag resistant kevlar
  • Extra knuckle padding
  • True 3-D curved finger forchettes
  • Rolllover Fingertips
Product Detail Page
Regular price: $94.99
Today Only: $90.99
Dragon Fire ALPHA X Certified NFPA 1971 Structural Glove Gauntlet Cuff
Dragon Fire ALPHA X Certified NFPA 1971 Structural Glove Gauntlet Cuff
Dragon Fire ALPHA X Certified NFPA 1971 Structural Glove Gauntlet Cuff
Regular price: $79.99
Today Only: $69.99
You Save: $10.00
Size:  Quantity:
The new Alpha X structural firefighting glove is certified by SEI to latest NFPA 1971 standard (2013 edition).
  • Full and complete natural leather outer shell
  • Premium Italian top grain cow and swine hide
  • No fabric utilized on outer shell Unequaled wet grip strength
  • Strategic wear and grip pads on finger tips / thumb
  • Excellent cut / rip / abrasion resistance
  • Overall anatomically correct ergonomic design
Unique Features:
  • Extreme dexterity with no sacrifice of protection
  • Glove refuses to harden or stiffen and remains soft / pliable after repeated use
  • Glove conforms and takes on unique hand signature of user after repeated use
  • Hand is effortlessly able to be inserted and removed when glove and or hand is wet or sweaty
  • Liner remains intact (no pull out) and is guaranteed
  • Critical palm and back of hand (greater knuckle region) have highest obtainable certification
  • TPP rating of greater than 60
  • All sizes and configurations in stock and ready to ship
  • Each pair packaged with versatile reusable utility bag and Velcro glove strap
Thermal Urethane Vapor Barrier:
  • Proprietary formulation specifically designed for the fire service
  • Robotic welded seams (not glued)
  • 350% elongation prior to burst (memory free performance)
  • Degradation (melt point) well above NFPA requirements
  • Superior liquid penetration resistance
  • Multiple sizes to accommodate various glove sizing
Kovenex Thermal Liner:
  • A revolutionary fabric made from a special patented blend of High-performance fibers
Specifications:
  • Sizes: 2X Small, Extra Small, Small, Medium, Large, Extra Large, 2X Large, 3X Large
  • Wrist Options: Gauntlet, Wristlet (Nomex Thermal Cuff)
  • Finger Lengths: Standard, Cadet (offers a length which is approximately 1/2 inch shorter than standard gloves), *Note: Cadet sizes offered in Gauntlet style only.
Product Detail Page
Regular price: $79.99
Today Only: $69.99
Dragon Fire ALPHA X Certified NFPA 1971 Structural Glove Wristlet Cuff
Dragon Fire ALPHA X Certified NFPA 1971 Structural Glove Wristlet Cuff
Dragon Fire ALPHA X Certified NFPA 1971 Structural Glove Wristlet Cuff
Regular price: $84.99
Today Only: $74.20
You Save: $10.79
Size:  Quantity:
The new Alpha X structural firefighting glove is certified by SEI to latest NFPA 1971 standard (2013 edition).
  • Full and complete natural leather outer shell
  • Premium Italian top grain cow and swine hide
  • No fabric utilized on outer shell Unequaled wet grip strength
  • Strategic wear and grip pads on finger tips / thumb
  • Excellent cut / rip / abrasion resistance
  • Overall anatomically correct ergonomic design
Unique Features:
  • Extreme dexterity with no sacrifice of protection
  • Glove refuses to harden or stiffen and remains soft / pliable after repeated use
  • Glove conforms and takes on unique hand signature of user after repeated use
  • Hand is effortlessly able to be inserted and removed when glove and or hand is wet or sweaty
  • Liner remains intact (no pull out) and is guaranteed
  • Critical palm and back of hand (greater knuckle region) have highest obtainable certification
  • TPP rating of greater than 60
  • All sizes and configurations in stock and ready to ship
  • Each pair packaged with versatile reusable utility bag and Velcro glove strap
Thermal Urethane Vapor Barrier:
  • Proprietary formulation specifically designed for the fire service
  • Robotic welded seams (not glued)
  • 350% elongation prior to burst (memory free performance)
  • Degradation (melt point) well above NFPA requirements
  • Superior liquid penetration resistance
  • Multiple sizes to accommodate various glove sizing
Kovenex Thermal Liner:
  • A revolutionary fabric made from a special patented blend of High-performance fibers
Specifications:
  • Sizes: 2X Small, Extra Small, Small, Medium, Large, Extra Large, 2X Large, 3X Large
  • Wrist Options: Gauntlet, Wristlet (Nomex Thermal Cuff)
Product Detail Page
Regular price: $84.99
Today Only: $74.20
Dragon Fire ALPHA X Certified NFPA 1971 Structural Glove Texan Cuff
Dragon Fire ALPHA X Certified NFPA 1971 Structural Glove Texan Cuff
Dragon Fire ALPHA X Certified NFPA 1971 Structural Glove Texan Cuff
Regular price: $129.99
Today Only: $119.99
You Save: $10.00
Size:  Quantity:
The new Alpha X Texan structural firefighting glove is certified by SEI to latest NFPA 1971 standard (2013 edition).
  • Full and complete natural leather outer shell
  • Premium Italian top grain cow and swine hide
  • No fabric utilized on outer shell Unequaled wet grip strength
  • Strategic wear and grip pads on finger tips / thumb
  • Excellent cut / rip / abrasion resistance
  • Overall anatomically correct ergonomic design
Unique Features:
  • Extreme dexterity with no sacrifice of protection
  • Glove refuses to harden or stiffen and remains soft / pliable after repeated use
  • Glove conforms and takes on unique hand signature of user after repeated use
  • Hand is effortlessly able to be inserted and removed when glove and or hand is wet or sweaty
  • Liner remains intact (no pull out) and is guaranteed
  • Critical palm and back of hand (greater knuckle region) have highest obtainable certification
  • TPP rating of greater than 60
  • All sizes and configurations in stock and ready to ship
  • Each pair packaged with versatile reusable utility bag and Velcro glove strap
Thermal Urethane Vapor Barrier:
  • Proprietary formulation specifically designed for the fire service
  • Robotic welded seams (not glued)
  • 350% elongation prior to burst (memory free performance)
  • Degradation (melt point) well above NFPA requirements
  • Superior liquid penetration resistance
  • Multiple sizes to accommodate various glove sizing
Kovenex Thermal Liner:
  • A revolutionary fabric made from a special patented blend of High-performance fibers
Specifications:
  • Sizes: Extra Small, Small, Medium, Large, Extra Large, 2X Large, 3X Large
  • Wrist Options: Texan
  • Finger Lengths: Standard
Product Detail Page
Regular price: $129.99
Today Only: $119.99
Dragon Fire NEXT Generation BBP Rescue Glove
Dragon Fire NEXT Generation BBP Rescue Glove
Dragon Fire NEXT Generation BBP Rescue Glove
Regular price: $62.49
Today Only: $52.49
You Save: $10.00
Size:  Quantity:
The BBP Rescue glove has a sewn in flame, cut, puncture, thermal and abrasion resistant liner. Integrated into our glove is our field proven, extreme duty vapor/BBP barrier. Utilizing the same Kovenex fabric as our famed Alpha X glove the BBP Rescue provides a level of thermal and flash protection not found in any other rescue glove. This protection affords the responder additional protection from hazards on the job. The palm is comprised of premium synthetic leather and strategically placed wear pads. The knuckles are protected with a form fitting impact protection pad finished in wear resistant premium synthetic leather. The glove is finished with a double stitched high dexterity shell, high visibility retro-reflective markings, thermal liner, and pathogen barrier. Attention to detail and utilization of our Extreme Bond Rentention Design yields a glove free of liner pull while allowing the responder to remain nimble and highly dexterous. Dragon Fire’s exclusive full tri-layer task specific design incorporates levels of protection not found in any other rescue, extrication or work glove.
Product Detail Page
Regular price: $62.49
Today Only: $52.49
Dragon Fire NEXT Generation First Due Rescue Glove
Dragon Fire NEXT Generation First Due Rescue Glove
Dragon Fire NEXT Generation First Due Rescue Glove
Regular price: $52.49
Today Only: $38.49
You Save: $14.00
Size:  Quantity:
The First Due Rescue glove has a sewn in flame, cut, puncture, thermal and abrasion resistant liner. Inside is a thinner layer of Kovenex, the same thermal layer we use in our famed Alpha X gloves. This provides a level of flash protection allowing you vital seconds to remove your hands from the dangerous environment. The palm and knuckle areas are constructed using premium synthetic leather and strategically placed wear pads. The glove is finished with a high dexterity outer shell with double stitched extremely flexible diamond profile rubber wear pads. The thermal liner and exterior are stitched together increasing the strength of the seams allowing for extended life of the glove. Dragon Fire’s exclusive task specific design incorporates levels of protection not found in any other rescue, extrication or work glove.
Product Detail Page
Regular price: $52.49
Today Only: $38.49
Dragon Fire NEXT Generation Tru-Fit Rescue Glove
Dragon Fire NEXT Generation Tru-Fit Rescue Glove
Dragon Fire NEXT Generation Tru-Fit Rescue Glove
Regular price: $52.49
Today Only: $38.49
You Save: $14.00
Size:  Quantity:
The Tru-Fit Rescue glove includes a sewn in flame, cut, puncture, thermal and abrasion resistant liner. Inside is a thinner layer of Kovenex, the same thermal layer we use in our famed Alpha X gloves. This provides a level of flash protection allowing you vital seconds to remove your hands from the dangerous environment. The palm is comprised with premium synthetic leather and strategically placed wear pads. Our Tru-fit glove provides you with an adjustable elastic velcro closure which creates an unsurpassed level of protection preventing anything from entering from the top of your glove. The glove is finished with a high dexterity outer shell with double stitched, extremely flexible diamond profile rubber wear pads. The thermal liner and exterior are stitched together increasing the strength of the seams allowing for extended life of the glove. Dragon Fire’s exclusive task specific design incorporates levels of protection not found in any other rescue, extrication or work glove.
Product Detail Page
Regular price: $52.49
Today Only: $38.49
Fire Hog NFPA Firefighting Glove
Fire Hog NFPA Firefighting Glove
Fire Hog NFPA Firefighting Glove
Regular price: $79.99
Today Only: $69.99
You Save: $10.00
Size:  Quantity:
Eversoft® cowhide leather, fire retardant, heat resistant 3.5 oz. to 4.0 oz. palm tanned to meet NFPA 1971 flame resistance test with additives to stay soft and absorbless water when wet repeatedly. A girdle sewn into palm for positive grip and extended wear for thumb area. Welts sewn into the middle and ring fingers for extra seam strength. Flexor, smooth grain cow leather 3.5 oz. to 4.0 oz. back with a knuckle band sewn across knuckles to give a layer of extra protection with a 60+ TPP rating. A double layer of soft 6 oz., non-melting, and non-dripping FR modacrylic liner for a smooth inside feel and heat protection to the back of hand. A leather cuff sewn inside wrist opening over liner for extended wear of liner and smoother donning. Exclusive breathable adhesive is coated over finger and thumb, ensuring full liner/barrier/shell bonding. Pyrotect Barricade moisture barrier is 3 mil. thick, breathable, 100 % water proof, viral/chemical penetration resistant and extends full length of glove for full protection. Nomex® 4-inch wristlet close fitting cuff to prevent embers or sharp debris entry extending not less than 2 inches beyond wrist crease with elastic sewn on back to wrist area. Gauntlet style has smooth grain all leather 1-inch cuff hemmed over top of glove. Elastic is sewn to wrist crease on back and palm for close fitting cuff. This glove is certified to NFPA 1971-2007by the Safety Equipment Institute (SEI). Eversoft® cowhide leather, fire retardant, heat resistant 3.50 to 4.0 oz. leather tanned with additives to stay soft and low water absorbance when soaked repeatedly. Meets NFPA 1971 flame resistance test. Flexor, smooth grain cow leather 3.5 oz. to 4.0 oz. back with 60+ TPP rating. Exclusive breathable adhesive for glove bonding. Pryotect Barricade 3 mil. thick barrier is 100% waterproof and viral/chemical penetration resistant. Nomex 4-inch wristlet cuff with leather pull patch. This glove is certified to NFPA 1971-2007by the Safety Equipment Institute (SEI). Proudly made in the USA with highly skilled employees.
Product Detail Page
Regular price: $79.99
Today Only: $69.99
Fire Pro 2 Fire Glove
Fire Pro 2 Fire Glove
Fire Pro 2 Fire Glove
Regular price: $78.99
Today Only: $69.99
You Save: $9.00
Size:  Quantity:
Eversoft® cowhide leather, fire retardant, heat resistant 3.5 oz. to 4.0 oz. palm tanned to pass NFPA 1971 flame resistant test with additives to stay soft and absorb less water when wet repeatedly. Welts sewn into the middle and ring fingers and thumb for extra seam strength. A double layer of soft, non-melting, non-dripping 6 oz. FR modacrylic liner for a smooth inside feel and heat protection to the back of hand. Special breathable adhesive is coated over finger and thumb, ensuring full liner/barrier/shell bonding. Pyrotect Barricade moisture barrier is 3 mil. thick, breathable, 100 % water proof, viral/chemical penetration resistant and extends full length of glove for full protection. Nomex 4 inch wristlet close fitting cuff to prevent embers or sharp debris entry extending not less than 2 inches beyond wrist crease with elastic sewn to wrist area. Gauntlet style has an all leather hemmed cuff with leather hang up loop extending beyond wrist with elastic sewn at wrist crease palm and back for close fitting. This glove is certified to NFPA 1971-2007 by the Safety Equipment Institute (SEI) Fire retardant treated heat resistant 3.5 oz. to 4.0 oz. Eversoft® cowhide leather with a 60+ TPP rating for overall heat protection. Double layer of 6 oz. FR modacrylic liner on back of hand for added heat protection. Full sock liner made of 6 oz., non-melting, and non-dripping FR modacrylic stitchbond. Breathable Pryotect Barricade 3 mil barrier is 100% water proof, and viral/chemical penetration resistant. EXCEEDS NFPA 1971 STANDARD, 2007 EDITION. 4 inch Nomex wristlet with leather pull patch Gauntlet style has a 2-inch all leather cuff sewn at top of glove. This glove is made from all USA manufactured fabrics/leather and produced in the USA with a highly skilled work force. This glove is certified to NFPA 1971-2007 by the Safety Equipment Institute (SEI)
Product Detail Page
Regular price: $78.99
Today Only: $69.99
ESKA Firefighting Gloves - Super Mars Leather
ESKA Firefighting Gloves - Super Mars Leather
ESKA Firefighting Gloves - Super Mars Leather
Regular price: $139.99
Today Only: $117.99
You Save: $22.00
Style:  Size:  This item is currently out of stock!
Specially treated leather is waterproof, non flammable, non shrinking, oil and acid resistant. These gloves will NOT harden or shrink after being exposed to water, direct flames or chimeicals. Specially treated leather stays soft and flexible and allows for machine washing. Liner will NOT pull out during the life of the glove. Thermodynamic properties ensure that your hands stay cool in the summer and warm in the winter. KEVLAR / Silver Blend liner provides heat and cut protection and is also anti-odor, anti-fungal, anti-static, and thrmo dynamic. CROSSTECH (C) membrane blocks blood-borne pathogens, fluids, chemicals and water. With a 3-demensional glove pattern that follows the natural curve of your hand you will be provided greater dexterity, fingertip tactility and overall comfort. Silicone-Carbon coated KEVLAR reinforcement on palm and knckle is highly heat and cut-resistant and also anti slip. 3Mscotchlite reflective material improves visibility in adverse conditions. This glove is ULTRA durable. It will last longer than any firefighter glove you have ever worn. EXCEEDS NFPA 1971:2007 requirements for structural firefighting. The new ESKA Firefighting Glove is constructed of high quality leather with Kevlar reinforcements. They meet the requirements of NFPA 1971, Standards on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting, 2007 Edition. The inner lining of the ESKA glove is constructed with a Crosstech membrane to protect against bloodborne pathogens. This membrane is built-in from finger tip to the end of the shell and is waterproof. It provides active-breathing and optimum heat and cold protection. This lining is 100% permanently attached by means of an ESKA patented process. The special composition of Kevlar lining enhances the glove with perminent and natural anti-odor, anti-static, and thermodynamic properties. The specially treated leather is waterproof, non-flammable, non-shrinking and oil and acid resistant. A wide heat pad and retro-reflective flame-resistant 3M Scotchlite trim are added for high visibility. * ERGONOMIC PATTERN: The glove features the same "resting position" as the hand (i.e. slightly bent-vaulted) * THREE-DIMENSIONAL CONSTRUCTION: The pattern is constructed of four parts, making it 3-D, just like the human hand. (most gloves are made as two parts). Extensive reinforement for greater durability. Also ideally suited for techincal applications. Anti-Slip and wear-resistant palm reinforcement made of soft silicone-carbon coated Kevlar. ABOUT THE ESKA GLOVE The ESKA Glove is the most sought after glove in both Europe and Australia, where the standards are even higher than that of the NFPA. The ESKA glove is both waterproof and fireproof and can withstand a blowtorch - WITH YOUR HAND IN THE GLOVE! - longer than any fire glove on the market today. The ESKA glove is machine washable and will actually get softer with washing and with age. This glove is 100% Waterproof – CROSSTECH™ Membrane. The liner and membrane will NOT pull out. This glove is Extremely Durable. 90% of the ESKA Glove is made in the United States. The duty to import these gloves from U.S. Customs is $10.00 a pair, which goes to Homeland Security, Etc. Kevlar and GoreTex are made by U.S. workers and exported to Austria to be manufactured. Even the thread and all other parts are made in the United States, then exported there to make our gloves the Best Firefighting Glove on the market! ESKA has been in the business of making gloves since 1912. Their expertise in the manufacture of these gloves makes them superior to our competitors. They are a Quaility #1 manufacturer! The ESKA Firefighting Glove we sell is #1 in Australia and Europe, whose standards are twice as demanding as the NFPA. We have put quality first, before cost. However, the longevity of this glove will outweigh the cost. We expect the ESKA Glove to get twice the wear against any firefighter glove made in the Orient. If you ask your regular supplier where their gloves are made, their answer (if truthful) will be from slave labor (most of the gloves you wear are made there). One of our most critical competitors says that their gloves are made in the U.S.A., BUT imports their materials from foreign countries. Example: We have cows and steers roaming our pastures, but there are no Kangroos that we know of! Made in the U.S.A.? NO! Manufactured here? Maybe???
Product Detail Page
Regular price: $139.99
Today Only: $117.99
ESKA Firefighter Gloves - FABRIC - Jupiter III
ESKA Firefighter Gloves - FABRIC - Jupiter III
ESKA Firefighter Gloves - FABRIC - Jupiter III
Regular price: $139.99
Today Only: $109.99
You Save: $30.00
Size:  Style:  This item is currently out of stock!
The new ESKA Firefighting Glove is constructed of high quality leather with Kevlar reinforcements. They meet the requirements of NFPA 1971, Standards on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting, 2007 Edition. The inner lining of the ESKA glove is constructed with a Crosstech membrane to protect against bloodborne pathogens. This membrane is built-in from finger tip to the end of the shell and is waterproof. It provides active-breathing and optimum heat and cold protection. This lining is 100% permanently attached by means of an ESKA patented process. The special composition of Kevlar lining enhances the glove with perminent and natural anti-odor, anti-static, and thermodynamic properties. The specially treated leather is waterproof, non-flammable, non-shrinking and oil and acid resistant. A wide heat pad and retro-reflective flame-resistant 3M Scotchlite trim are added for high visibility. * ERGONOMIC PATTERN: The glove features the same "resting position" as the hand (i.e. slightly bent-vaulted) * THREE-DIMENSIONAL CONSTRUCTION: The pattern is constructed of four parts, making it 3-D, just like the human hand. (most gloves are made as two parts). Extensive reinforement for greater durability. Also ideally suited for techincal applications. Anti-Slip and wear-resistant palm reinforcement made of soft silicone-carbon coated Kevlar. ABOUT THE ESKA GLOVE The ESKA Glove is the most sought after glove in both Europe and Australia, where the standards are even higher than that of the NFPA. The ESKA glove is both waterproof and fireproof and can withstand a blowtorch - WITH YOUR HAND IN THE GLOVE! - longer than any fire glove on the market today. The ESKA glove is machine washable and will actually get softer with washing and with age. This glove is 100% Waterproof – CROSSTECH™ Membrane. The liner and membrane will NOT pull out. This glove is Extremely Durable 90% of the ESKA Glove is made in the United States. The duty to import these gloves from U.S. Customs is $10.00 a pair, which goes to Homeland Security, Etc. Kevlar and GoreTex are made by U.S. workers and exported to Austria to be manufactured. Even the thread and all other parts are made in the United States, then exported there to make our gloves the Best Firefighting Glove on the market! ESKA has been in the business of making gloves since 1912. Their expertise in the manufacture of these gloves makes them superior to our competitors. They are a Quaility #1 manufacturer! The ESKA Firefighting Glove we sell is #1 in Australia and Europe, whose standards are twice as demanding as the NFPA. We have put quality first, before cost. However, the longevity of this glove will outweigh the cost. We expect the ESKA Glove to get twice the wear against any firefighter glove made in the Orient. If you ask your regular supplier where their gloves are made, their answer (if truthful) will be from slave labor (most of the gloves you wear are made there). One of our most critical competitors says that their gloves are made in the U.S.A., BUT imports their materials from foreign countries. Example: We have cows and steers roaming our pastures, but there are no Kangroos that we know of! Made in the U.S.A.? NO! Manufactured here? Maybe??? Think about this before you buy. Be safe...
Product Detail Page
Regular price: $139.99
Today Only: $109.99