This firefighter bailout bag is the king. You can buy the cheaper ones but you won't get what this one has. First from the outside in you will get a sturdy hi-viz bag. This can attach to to your turnout gear truckman's belt if you would like. Two inner straps make it easy for you to attach it to anything you have available. Can be added to any harness or belt. The bag is durable and will stand up to the rigors that you do. When you open up the bag, you have your FESH hook. What is FESH? FESH is a Firefighter Escape Survival Hook. This hook has a 4 inch bite and a 3.75 inch throat. It's been tested for up to 6000 pounds. It's NFPA approved. Secondly attached to the FESH hook, is 50 feet of 7.5 millimeter Sterling rescue rope. This is well enough for you to egress from a several story building safely in an emergency. The rope itself is threaded through the one thing on this system that makes this different than any other escape hook ever invented. The G-Zero descender allows you to bail out the window and if you let go of your rope or loose control, you STOP! Your weight will put enough friction on the rope to stop you from an uncontrolled drop. That is never safe! Look at the detailed photos to get a little closer idea of how this works. Essentially we are using friction and a pinch point to stop you from falling. Attached to the G-Zero descender is a caribiner. This is the anchor point of you and the harness. This is where the magic happens. The weight of the firefighter (YOU) puts enough friction on the bail-out line so that you do not move. The bottom line is this: you want this as your bail out kit. Hook is 12 ounces MBS over 5000 lbs at the arch and 1140 lbs at the tip Pull Test Results from 12/21/07 Hook 1 - 5242.50 lbs - Rope Broke Hook 2 - 5287.50 lbs Rope Broke Hook 3 - 5422.50 lbs Rope Broke Hook 4 - 5400 lbs Rope Broke Hook 5 - 4950 lbs Rope Broke Hook 6 - 5625 Hook Broke 4" bite to go around window/door - wood frame construction plus pipes and ladder rungs Bites into and through sheetrock 3.72" throat for deep secure anchoring "T" and arch design at end of hook to prevent rocking and rope pinch Rope is 7.5mm Technora manufactured by Sterling 4000 MTS - NFPA Descending device is the SBG-II one handed Belay manufactured by Omega Pacific Carabineers are locking and screw locking that meet and exceed NFPA requirements System stays on your bunker pants One size fits all leg harness Golfire has manufactured this hook to accommodate all types of construction. Most wood frames around windows and doors are constructed of two 2 x 4's plus the window frame its self. The FESH Hook was manufactured to go around these objects to give you the maximum security in an anchoring system. Any smaller of a hook would only bite into the molding around a window. The G-Zero Bag was developed to be either a pocket bag or attached to a harness or belt. The rear of the bag has a 5000 lb belt loop that if you place a belt or harness through the loop it becomes integrated with that belt or harness. On the end of the loop is a 5000 lb D-Ring that is directly attached to you G-Zero and rope. So when you deploy your system you are pre-connected! System includes the G-Zero Descender, FESH Hook, G-Zero Bag for pocket or Belt/Harness attachment, 7.5mm NFPA Poly Nylon Rope or 7.5mm NFPA Technora, and 12" Tether with 5000 lb Snap links.

Visor lights are great because the allow you to be seen only when YOU want to. LED visor lights are the easiest to install of any led dash light. All you do is attach the light to the visor on the passenger side of your vehicle. You leave it there until YOU are ready to use it. When you are ready to turn the led visor light on in an emergency, just plug the LED visor light in for power, and flip down your passenger side visor and you are now ready to roll. It's small and inconspicuous, so LED visor lights tuck away until you are ready. In the past LED visor lights were sub par - they weren't bright, they were cheaply made. With this one, that is no longer the case. It's a quality built and as far as brightness goes, this is one of THE brightest available. It uses 3 powerful generation 3 LEDs to punch through tint like a pro. Meets SAE J595 certification.

Features

• Our Gen3 LED Visor Light has a smaller size packed with more power! Light is made with 16 ultra bright Generation 3 LEDs for maximum warning power in a smaller package
• Easy to install - plug into a 12 Vdc outlet and securely strap to the visor with adjustable Velcro straps.
• Light may be hard wired by cutting off the DC plug
• Non-volatile memory recalls last flash pattern used at power up
• Features 16 built-in flash patterns
• Available in 5 color combinations
• Light has built-in protection against reverse polarity and voltage spikes
• Current Draw: 0.75 amps @ 12.8 Vdc or 0.35 amps @ 25.6 Vdc
• 10- 30 volt for world wide use
• Designed for interior use only
• 5 Year No Hassle Warranty

LED Visor Light - Operating Instructions

1. Plug the LED VISOR LIGHT power cord into the vehicle cigarette lighter or 12 Vdc Power receptacle outlet. Note: The electrical protection fuse (10 amp-type AGC) is located in the nose of the cigarette lighter plug (not shown). Unscrew the plastic retaining ring to expose fuse. 2. To activate the light press the "power" button located on the front of the unit. 3. To deactivate the light push the power button. 4. The LED VISOR LIGHT can generate 16 different light patterns. To change light patterns, momentarily press the white ?Arrow? button to advance the pattern. Flash patterns are listed on this sheet and on the back of the LED VISOR LIGHT housing.

Mounting Your LED Visor Light

Important Note: LED VISOR LIGHT must be properly installed to prevent the unit from coming loose during braking or maneuvering. Note: Attach LED VISOR LIGHT to passenger side visor ONLY. 1. Position the LED VISOR LIGHT with the power cord toward the top of the vehicle, and the back of the unit against the vehicle's passenger side visor. Note: The visor must be in the down position. 2. Pivot the visor down and secure the LED VISOR LIGHT by passing the end of one Velcro strap through the buckle on the other end of the same strap. Pull the loose end of the strap to tighten and then attach the loose end to the buckle side strap to secure. Repeat for the opposite side. Return the vehicle's visor to the stored position. NOTE: Attach LED VISOR LIGHT to PASSENGER SIDE visor ONLY

Welcome to the only siren you will ever need. You have just found the least expensive yet toughest siren and speaker kit that is available on the market. If you want a simple, easy to install, easy to use, and very LOUD siren and speaker combo kit, This is THE one! Every police or fire siren that is manufactured needs a speaker. You need both(plus the wire) to be able to function. We thought it would make sense to bundle both the siren and speaker together in an affordable VERY low priced package. You receive everything you need (but the wire) to install the siren and respond to emergency calls. This is it. The Carson Siren and Speaker bundle. This kit includes a very loud and very powerful 100 watt siren. It's call the Carson SA-365. This Siren is the same loudness as the emergency vehicles you hear in your neighborhood everyday. But we also include the powerful 100 watt speaker in the bundle as well. While most of our competitors are including a bell speaker for about the same price, we are the quality and price leader by offering a very compact speaker with the Carson CSP-100B. Now some of you may be asking why do I need a compact speaker and siren. First - look under your hood and see if you can find a large space to install a speaker. That is where the speaker is typically installed. Either in the grill of the vehicle or in the front of the hood compartment. With our kit, you have a small and loud speaker that you can mount virtually anywhere. That's important!

Want to know the details of the Carson SA-365?

Carson has went to work in the engineering department listening to it's customer's needs and delivering with an even better value. It's smaller and more compact than before and still delivering all the standard features you are used to. Never before has a police and fire siren delivered such powerful features at an affordable price. It's perfect for volunteer firefighter's who need a compact siren that can mount underneath the dash of your personal vehicle so that it can be used when you respond to fire calls and can be out of the way when your off duty. It's ease of use is also great. No big knobs just simple toggle switches that you switch between all 6 different sound functions (wail, yelp, air horn, manual, phaser). If you need a set of features on a Carson sirens unit like this, simply put, this is the siren you need to buy. Plus, with a 5-Year No Hassle Warranty that we back up - trust us - with the siren you're covered.

Welcome to the only REMOTE siren you will ever need. You have just found the least expensive yet toughest remote siren and speaker kit that is available on the market. If you want a simple, easy to install, easy to use, and very LOUD siren and speaker combo kit, This is THE one! THIS IS NOT A TOY!

What do we mean by remote?

Remote means that the switches are the only thing you see. You mount the speaker underneath your hood. You mount the box or the "amplifier" anywhere inside your vehicle and you mount the switches that control it all in a place that is accessible to you yet out of the way. This means for vehicles that have very little space on the inside, you can still use and operate a fully functional emergency police siren without the siren getting in the way of the everyday use of the vehicle. Every police or fire siren that is manufactured needs a speaker. You need both(plus the wire) to be able to function. That is the three main components of a police or fire vehicle siren system. The siren, the speaker and the wire. We thought it would make sense to bundle both the siren and speaker together in an affordable VERY low priced package. You receive everything you need (but the wire) to install the siren and respond to emergency calls. This is it. The Carson Remote Siren and Speaker bundle. This kit includes a very loud and very powerful 100 watt siren. It's called the Carson SA-361. This Siren is the same loudness as the emergency vehicles you hear in your neighborhood everyday. But we also include the powerful 100 watt speaker in the bundle as well. While most of our competitors are including a bell speaker for about the same price, we are the quality and price leader by offering a very compact speaker with the Carson CSP-100B. Now some of you may be asking why do I need a compact speaker and siren. First - look under your hood and see if you can find a large space to install a speaker. That is where the speaker is typically installed. Either in the grill of the vehicle or in the front of the hood compartment. With our kit, you have a small and loud speaker that you can mount virtually anywhere. That's important!

OVERSTOCK PRICE REDUCTION WHILE SUPPLIES LAST!
Compare our competitors price of over $240.00 on the same item! We save you money and give you the best strobe kit on the market. It's rugged and we know you'll love it so much we guarantee it. The Sound Off Strobe Kit delivers a whopping 90 watts of power from the power supply out to the strobe tubes in your vehicle. Plus, you get EVERYTHING you need...

All This Included!

• 2 15' strobe cables
• 2 30' cables
• 4 push-in-style tubes
• 6-outlet 90-watt power supply
• 12 flash patterns
• 10-30 volt operation

Let's Compare!

Feature	Sound Off Kit	Whelen Kit
Price	Less Cost	More Cost
Cable Length	(2) 15 FEET & (2) 30 FEET	(4) 15 FEET CABLES
Flash Patterns	A Whopping 12	Only 10 Patterns
Warranty	2 Year No Hassle	2 Years
What Does This Mean?	Better Value!	More Expensive!