The SC-409 Commander Siren Police Siren and Law Enforcement Siren is the Ultimate of Technology, Styling, and Control SC-409 Commander Introducing the SC-409 Commander: the most technologically advanced and stylish console mount light control siren. The new Commander incorporates superior versatility through face programmable and DIP switch selectable options to control nearly every kind or lightbar, directional light, auxiliary light, and other auxiliary equipment including multiple gun locks and video camera systems. The SC-409 Commander most notable, new technological features include the video trigger option on each light switch outputs, face programmable auxiliary switches to select the switch function for either on/off, on/off with video trigger, momentary, and 10 or 20 second timed momentary, a splash resistant rubberized face with integrated membrane push button controls and liquid repelling actuator flanges, and exposed fuses that are included in the output diagnostic status on the face. Take Control with the new SC-409 Commander The sleek and stylish design and layout of the face and connections make the SC-409 COMMANDER both easy to operate and simple to install and program. The rubberized face is soft to the touch but sturdy enough to take the rigors of everyday use. For more information, visit our website or give us a call. Designed to power one or two 100-watt speakers, the SC-409 Commander includes a 6 position rotary switch including the new Cycler setting which allows the operator to select the Horn Ring Cycler 2 (HRC2) mode from the rotary switch. There are also two override membrane push button switches for Manual and Air Horn control. A pursuit ready lever/slide switch for up to 60 amps of primary light control has the flexibility to be progressive, non-progressive, or partially progressive, tie auxiliary switches to programmed positions on the lever/slide switch and automatically run the siren tones. The siren is LED backlit and the auxiliary switches turn red when activated. The noise canceling microphone has P.A. override in all positions except Radio with a face mounted volume control knob. The Siren Cutout connects to the door switch and automatically disables the siren when the driver's door opens. The siren is installed using detachable connectors with screw-down terminals for all connections except the lever/slide switch, which utilize heavy-duty screw-down terminals. Each output is individually fused and all fuses are externally accessible. As with all Carson Sirens products, the Commander siren is backed by a no-hassle 5-year limited warranty. * 100/200-watt electronic siren amplifier with 140 amps of light control * Programmable lever/slide switch with the flexibility to be either progressive, non-progressive, or partially progressive * 6 face programmable auxiliary membrane switches with the option to be on/off, on/off with Video Trigger, momentary or 10 or 20 second timed momentary * Siren Wail, Yelp, Phaser, Manual, and Air Horn tones with optional Two-Tone/HiLo sound * Six position rotary switch and two momentary membrane switches for Manual and Air Horn override * PA override with attached noise-canceling microphone and face mounted volume control knob * Face and DIP switch programmable siren features * LED Backlighting and auxiliary switches turn red when activated * Horn Ring Cycler 2 (HRC2) for hands free siren tone control on the Cycler position on the rotary switch * Video Trigger output automatically initiates the record on a video camera system and is activated by each position on the lever/slide switch and on programmed auxiliary switches * Timed Override toggles the selected tone on the rotary switch up one to the next intense siren tone for 10 seconds and then toggles back to selected tone * Sweep and Intersection modes are automatic sequences of Yelp, Phaser, and Air Horn at different speeds activated by tapping the horn ring when the rotary switch is in either the Wail, Yelp or Phaser position * Siren Cutout/Park Kill to disable the siren when exiting the vehicle with option to disable position 3 on the lever/slide switch * Splash resistant rubberized face with built in membrane push button switches and liquid repelling actuator flanges * Exposed fuses on the bottom side of the siren to protect each output * Short circuit, high voltage, and reverse polarity protection system * Detachable wiring connectors with screw-down terminals for the siren and auxiliary outputs and heavy-duty screw-down terminals for the lever/slide switch outputs * Mounting brackets for the siren and PA microphone * 2-3/4" H x 6-1/8" W x 8" D * No-hassle 5-year limited warranty

The SA-400 Siren Classic Siren

The SA-400 Classic Siren is called the "Classic" for a reason. It's because for nearly 35 years, the Sa-400 has been in service and keeping you safe. It was first introduced nearly 35 years go for police, fire and EMS agencies. It is simply an industry workhorse. Several thousand of them are still in service today alerting motorists of an approaching police officer, ambulance or other emergency vehicles. The SA-400 is a 200 watt capable siren with a classic rotary switch for easy selection of all of your siren tones, your radio. It includes a momentary push button for tone control and override and a large PA volume knob for control the loudness of the included public address system. A high quality PTT (push-to-talk) microphone, makes all of your uses of the PA system, clean clear and reliable. The noise-cancelling PA microphone is a high quality siren microphone with a large push-to-talk (PTT) button that is easy to use even in the dark. The face plate lights up in the dark with the LED back lighting that can be controlled via your vehicles dimmer circuit. You can also control your siren by using the factory horn circuit from your vehicle. This feature is called the Horn Ring Cycler 2 (HRC2). That allows you to operate the siren hands free by cycling through the siren tones simply by pressing your horn. Wire up the Siren Cutout / Park kill feature so that when you arrive on scene and open your door the siren will shut off. We recommend turning your siren off before that time though to save the ears of citizens or co-workers! The SA-500 includes a lot of features. You don't have to use all of them. That is why you can program the police / fire siren to your needs easily by using the internal DIP switches. Dip switches are a simple way that you can turn certain features of the SA-400 Carson Police Fire Siren on or off. Many sirens are only 100 watts. This is the standard. However, with the SA-400 Classic siren, it is 200 watts. You can power 2 siren speakers with the siren. It does not have dual tone capability so both speakers will be sounding the same thing, but with 200 watts, it will be louder and give you more warning power! Internal fusing prevents short circuit / overheating and with an output and power LED indicator light on the front panel, you don't have to take the entire siren out before you begin to diagnose any problem you may have. Another notable feature of the siren is that to wire the siren, you don't need a harness. The siren has screw down terminals so that you can simply strip your wire, then screw it down to the back of the siren. If for some reason that you need to take your siren out, remove the wiring block and take it away. You don't have to cut wires in order to do this. A 5 year warranty provides peace of mind that if you need service we are here for you!

Features

• 100/200-watt electronic siren amplifier
• Siren Wail, Yelp, Phaser, Manual and Air Horn tones with optional European HiLo/Two Tone
• Six position rotary switch with a momentary push-button override
• PA override with attached noise-canceling microphone and large PA volume control knob
• LED backlighting
• Horn Ring Cycler (HRC) for hands free siren tone control
• DIP switch programmable
• Externally fused
• Short circuit, high voltage and reverse polarity protection systems
• Splash-resistant face
• Wiring connector
• Mounting bracket
• 2-1/2" H x 6-1/8" W x 5-3/8" D
• No-hassle 5-year limited warranty